Minimal Jewelry Box

pinshape

Printing with ABS and PLA materials, the settings are as follows: For Parts_Together.stl, infill is set to 35%, layer height is 0.2mm, shell thickness is 2, raft is not necessary, support is required, support density is 15% and support bridges are enabled. For Seprated Parts, levels 1 and 2 have a 25% infill rate, 0.2mm layer height, 2-shell thickness, no raft needed, support is yes, support density is 15%, and support bridges are on. Levels 3 and cap door have a 35% infill rate, 0.2mm layer height, 2-shell thickness, no raft needed, support is yes, support density is 20%, and support bridges are enabled. For Drawer and Pins, the settings are as follows: infill is set to 30%, layer height is 0.2mm, shell thickness is 2, raft is not necessary, support is not required. Printer settings include MakerBot brand, Replicator 2X model, rafts are not needed, supports are yes, resolution is 0.2mm, infill is 35%, and notes are minimal jewelry box that can be used for keeping small jewels and things, also can print in 50% for small plate printers.