MiniITX PC Case V2 with 140mm Case Fan and Low Profile PCIe Card

thingiverse

Here's yet another 3d printed PC case for a MiniITX build that accommodates a low profile PCIe card. It requires the use of a Pico PSU and does not have any locations for mounting a any SATA drives. WARNING: This currently only supports a single height graphics card. Dual slot GPUs are not currently supported. Specs: Requires Mini-ITX Motherboard Requires low profile [CPU cooler](https://www.amazon.com/gp/product/B075SG1T3X/). Cooler height depends on fan size, see below. Requires low profile PCIe card. Requires [PicoPSU or similar](https://www.amazon.com/gp/product/B07PPYWGNH/) and has mounting hole for 8mm diameter 12v DC jack. Mounting holes for 140mm to 120mm case fan on lid. With a low profile cooler, the case will accommodate a 25mm thick fan. A slimmer fan or omitting the fan might allow a taller cooler. Options for [USB front panel connectors](https://www.amazon.com/gp/product/B010NBLRHK/). Mounting location for [16mm diameter power switch](https://www.amazon.com/gp/product/B07PPDTB5R/). Requires [6/32 threaded inserts](https://www.amazon.com/gp/product/B07NBMGJPD/) for mounting motherboard Requires [M3x3x5 threaded inserts](https://www.amazon.com/gp/product/B07D683Q26/) and [M3x6mm bolts](https://www.amazon.com/gp/product/B01E5EOIWW/) I've included a version of the base that has the cutouts for a The feet can be printed in TPU for additional grip and shock absorption. The footprint is designed to be printed on a 200x200mm bed and was easily printed on my Ender 3 Pro. This case should provide around 50mm clearance between a 25mm thick fan and the motherboard. That means, without a fan you should be able to have about 75mm clearance for a CPU cooler. My build uses a [Asus Prime A320I-K motherboard](https://www.amazon.com/gp/product/B07VHQYGPP/), with an AMD Ryzen 3400G. You could put a low profile GPU (such as a 1650) in this case with a processor without a gpu.