Miniature Legion 5 Gaming Laptop (1/4 scale)

prusaprinters

<p>Print with 0.1mm layer height to get a cleaner look.</p><p>Tolerances around the hinge are tight so you may need a hobby knife or some sandpaper to trim down the hinge components to fit.&nbsp;</p><p>Supports are not required and I have included 4 stickers that can be glued onto the lid with some glue stick to act as the display.&nbsp;</p><p>I recommend printing this in a black plastic. (I only had white pla)</p><p>STEP files are also included if you wish to modify it.</p><p><strong>Materials I used:</strong></p><ul><li>Superglue</li><li>Gluestick</li><li>Small paperclip (~.75mm)</li><li>2d printer (optional)</li><li>Hobby Knife</li><li>Fine Sandpaper</li></ul><p><strong>Assembly instructions:</strong></p><ul><li>Glue “Bottom Panel.stl” to the bottom of “Body.stl” (refer to images for detail)</li><li>Glue “Hinge.stl” into the holes above the keyboard</li><li>Glue “Feet.stl” into the holes in the bottom of “Body.stl”</li><li>Position “Lid.stl” over the hinges</li><li>Insert paperclips and trim off excess with flush shears (wear eye protection)</li><li>Put a drop of superglue over the exposed end of the paperclip to hold it in place (optional)</li><li>Glue on screen stickers (with glue stick)</li></ul>