Mini syringe pump with parts from optical drive

cults3d

My another project with optical drive parts... I was asked if these stepper motors would have enough force to move a syringe so I decided to test it.And as you can see, they can and do it well.This frame is designed for 5ml syringe, with stepper motor there is possible great resolution to achieve.Only 3 parts to print.There is no need to use slide bushes/linear bearings in this model Here you can see how it works: https://youtu.be/YdeZJIZdA_A Parts needed from optical drive: - stepper motor - linear shaft Other parts: - syringe - im using "diconex 5ml 3 part syringe", I don't know if they are available in other countries, if not there is model which should have same size: https://s.click.aliexpress.com/e/_AmWxks - mouse limit switches - im using these, model D2F-L3.They are optional and required only if you would need to have some feedback from device https://s.click.aliexpress.com/e/_9wbixc Assembly guide: 1.If you want some feedback, install the limit switches first and arrange the wires in the cable tray 2.Prepare the stepper motor.You will need to enlarge the holes to fit 2 x M3 screws.Use a file or a drill 3.Mount stepper motor in frame (2 x m3 screws) 4.Put a "nut" element on the shaft and then mount both in frame.Use glue on the ends of the shaft after mounting 5.Mount the syringe 6.Mount the 3d printed cover // This syringe is controlled over wifi, im using this code: https://www.engineersgarage.com/nodemcu-esp8266-stepper-motor-interfacing/ My circuit diagram: https://imgur.com/YRc2kUd Parts required to build this circuit: - stepper motor from optical drive - usb cable/usb charger - 12V power supply - Wemos D1 https://s.click.aliexpress.com/e/_Aov9xq - stepstick A4988 https://s.click.aliexpress.com/e/_Atx0n6