Mini Splitter v2 for MMU2+1s mod - PC4-01 fitting version

prusaprinters

<p>This is a remix of Mini Splitter v2 for MMU2+1s mod adapted to use PC4-01 fitting between the splitter and the extruder.</p><p>The idea of this mod is to releive the tension in X carriage caused by 10 PTFE tubes connected directly to the extruder.</p><p>You will have to print both parts.</p><ol><li>Splitter. It's the version dessigned for FDM. Print the file as it's been uploaded, that is, with the 10 holes facing the bed. No supports needed. 3 perimeters. Infill 15%. Recommended to print with low layer height (0.15 or lower) so the interior of the splitter is as smooth as possible.</li><li>fs-cover. Same print settings as original file from Prusa.</li></ol><p>You will need a PTFE tube to join both parts. Recommeded length 70mm. Recommended 2,5/4 PTFE (inner/outter diameter) making a chamfer in both ends.</p><p>You can get MMU board firmware here:</p><p><a href="https://github.com/gonchogsm/MMU2-1S_Firmware/releases/tag/PC4-01_v1.0">https://github.com/gonchogsm/MMU2-1S_Firmware/releases/tag/PC4-01_v1.0</a></p><p>The rest it's the same as in the original version <a href="https://www.prusaprinters.org/prints/71799-mini-splitter-v2-for-mmu21s-mod.">https://www.prusaprinters.org/prints/71799-mini-splitter-v2-for-mmu21s-mod.</a> Needed set screw M3x3mm or larger to fix the PTFE to the splitter (one per PTFE, max. 10)</p>