Mini Quadcopter fpv Racer 120mm micro FC lumenier racing F4 Brushless 1103 10.000kv 2S

thingiverse

Here is a Mini Quad Racer 120 mm kit composed of a frame made from polycarbonate, featuring a soft cockpit in TPU. The following components are included: I opted for the new Lumenier F4 ARM FC: https://www.drone-fpv-racer.com/lumenier-micro-lux-f4-1308.html The Quad ESCs chosen are Lumenier 4x10amp BHelis: https://www.drone-fpv-racer.com/lumenier-esc-10a-4-en-1-blhelis-bb2-dshot-1286.html A FrSky 8 Channel SBUS / PPM Mini Receiver from Banggood was selected: http://www.banggood.com/FD800-Tiny-Frsky-8CH-PPMSBUS-Receiver-Compatible-FRSKY-ACCST-X9DPlusDJTDFTDHT-For-QX95-QX90-p-1108071.html?p=LD020411878172015024 The Brushless Motors chosen are RacerStar 1103 10,000kv from Banggood: http://www.banggood.com/Racerstar-Racing-Edition-1103-BR1103-10000KV-1-2S-Brushless-Motor-For-100-120-150-RC-Multirotor-p-1110306.html?p=LD020411878172015024 The Lipo Nacelle is a 500mAh Bolt from Hobbyking: https://hobbyking.com/fr_fr/turnigy-bolt-500mah-2s-7-6v-65-130c-high-voltage-lipoly-pack-lihv.html For the VTX, I used the TBS Unify Pro 5.8 GHz V2 - SMA: https://www.drone-fpv-racer.com/tbs-unify-pro-58-ghz-v2-sma-993.html A TBS Antenna UNIFY PRO LINEAR ANTENNA 5G8 was also chosen: http://www.team-blacksheep.com/products/product:984 The Camera is a simple 600TVL 110 ° from Banggood: http://www.banggood.com/600TVL-1_8mm-14-CMOS-120-Degree-Wide-Angle-Lens-FPV-Camera-PALNTSC-3_7-5V-p-1092333.html?p=LD020411878172015024 Two M1.6 screws of 16 mm are included for lipo fixation. Note: The signal cables ESC should be changed to the correct order when entering the controller. Please refer to picture 8 for the correct configuration. Also, please note that the VTX Unify heats up very quickly. To limit heat and prevent flipping, I used a velcro to secure it in place.