Mini Quad Racer 120mm FC lumenier F4 Brushless 1103 10.000kv 2S

pinshape

Here is the text rewritten: This mini quad-course kit measures 120 mm and features a polycarbonate frame with a soft TPU cockpit. The components include: I have chosen the new Lumenier F4 ARM FC, which can be found at https://www.drone-fpv-racer.com/. The Quad ESC Lumenier 4x10amp Bheli is also included, available at https://www.drone-fpv-racer.com/. A mini-receiver SBOX/PPM from Fransky with 8 channels from Banggood is part of the kit: http://www.banggood.com/FD800-... -1108071.html? P = LD020411878172015024. Brushless motors are provided by RacerStar, specifically the 1103 10,000kv model from Banggood: http://www.banggood.com/Racerstar-Racing-Edition-1103-BR1103-10000KV-1-2S-Brushless-Motor-For-100-120-150-RC- Multirotor-p-1110306.html? P = LD020411878172015024. The lipo case is a 500mAh unit from Hobbyking: https://hobbyking.com/fr_fr/tu... . VTX components include the TBS UNIFY PRO 5.8 GHZ V2 - SMA, available at https://www.drone-fpv-racer.com/. An antenna is also included, specifically the TBS UNIFIER PRO LINEAR ANTENNA 5G8 from Team-BlackSheep: http://www.team-blacksheep.com... . For the camera, a simple 600tvl 110° model from Banggood has been chosen: http://www.banggood.com/600TVL-1_8mm-14-CMOS-120-Degree-Wide-Angle-Lens-FPV-Camera-PALNTSC-3_7-5V-p- 1092333.html? P = LD020411878172015024. 2 x M1.6 screws of 16 mm are included for fixing the lipo case. Note that the signal cable order on the ESC must be changed when connecting to the controller, as indicated in photo 8. The VTX unification heats up very quickly, so I used a velcro to limit heat and prevent classic double-sided tape from melting.