Mini pottery wheel magnetic sanding adapter 10cm
thingiverse
This adapter is for mini pottery wheels with 10cm diameter. You will have 9cm diameter left to sand. The rest is used for clamping the disc down. Parts needed: - 2 M3x12mm screws - 2 M3 nuts - 12 8mm x 3mm magnets - 10cm acrylic/glass discs Assembly: - Put the magnets in the holes and either glue them in with hot glue, or put some tape over the holes. - (You might have to sand down the sides of Base_A and Base_B for a tighter fit.) - Place Base_A and Base_B on your pottery wheel and connect them using the screws. Make sure they fit tightly, by trying to pull them off the wheel. If you can't pull them off easily, you have a good fit. - Place a 10cm acrylic disc in the middle of the 2 bases and the sanding paper on top. - Push the Clamp_Ring on the acrylic disc. Everything should be held down by the magnets. Happy sanding
With this file you will be able to print Mini pottery wheel magnetic sanding adapter 10cm with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Mini pottery wheel magnetic sanding adapter 10cm.