Mini ITX Pico PC Case Stackable

thingiverse

This is my take on a mini stx Louqe Ghost S1. It houses a mini itx motherboard and a pico psu. I've found that if you remove the shroud from an ssd, it will fit neatly in the back. The cooler clearance is around 58mm, which means something like the Is-60 from Id Cooling or the Akasa NeroLX2 will work well (these are the only ones I've tested, many more will work). I've provided a hole at the back for the psu connector, so you may have to drill it out. The front is blank with no button hole, allowing you to customize it however you want - I drilled a hole and used an anti-vandal switch. Overall measurements are around 200x185x60mm, making them easy to print on something like an Ender 3. You'll only need supports for the i/o shield. I've used 3.5mm (No.6) by 13mm countersunk screws throughout. These cases can be stacked as there are holes in the bottom of each one, and I'll hopefully be designing more soon - let me know if you have any ideas for other modules. If you have any questions, please ask. You can find more of my work on Instagram at msvprinting or through a donation to paypal.me/msvprinting