Mini GT HKS Toyota GR Supra Display Base

prusaprinters

<p>In this display base, I have also included an additional generic base so it is not fixed to the Mini GT HKS GR Supra.</p><p>The display base is separated into 3 parts for easy printing and colour swap. The parts are:</p><p>1) Name plate (NamePlateAssem.STL and NamePlateHKSOnly.STL)<br>2) Base (BaseV2.STL and BaseV2 (NoHoles).STL)<br>3) Base back wall (BoxBackV1.STL)</p><h3>Base and Name Plate Variants</h3><p>There are 2 variants of Base and Name plate in this, the one in my pictures are "BaseV2" and "NamePlateAssem".</p><p>The difference for each base are:</p><h3>BaseV2:</h3><p>My standard base design with holes pre made so that wires can go through to hold the car.</p><h3>BaseV2 (NoHoles):</h3><p>My standard base design but with the holes removes, so you could drill your own holes to fit any car you wanted.</p><p>The difference for each name plate are:</p><h3>NamePlateAssem:</h3><p>As shown in the picture, it is made for the HKS GR Supra with modelled HKS and Toyota Supra names on it.</p><h3>NamePlateHKSOnly.STL:</h3><p>A generic design with just the HKS branding on it.</p><h3>Print Settings</h3><p>Nozzle size = 0.4 mm (minimum, smaller better)<br>Layer height = 0.2 mm</p><p>Filament change layer for colours on "BoxBackV1":<br>1) Layer 19 (Lower HKS tear design, mine is in green)<br>2) Layer 24 (Upper HKS tear design, mine is in purple)<br>3) Layer 29 (HKS thin lines, mine is in red)<br>4) Layer 34 (HKS logo background, mine is in white)<br>5) Layer 39 (HKS lettering and border around the square, mine is in black)</p><p>Filament change layer for colours on "NamePlateAssem":<br>1) Layer 7 ("Toyota" lettering, mine is in red)<br>2) Layer 11 ("Supra" lettering and HKS square background, mine is in white)<br>3) Layer 15 (HKS lettering on square, mine is in black)</p><p>Filament change layer for colours on "NamePlateHKSOnly":<br>1) Layer 8 (HKS square background)<br>2) Layer 13 (HKS lettering on square and borders around the square)</p><h3>Colours</h3><p>Colours of all other items is your choice.</p><h3>Assembly</h3><p>The car is tied with metal wire through the display base holes, the wire will need to be slide between the wheels and the metal body.</p><p>Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.</p><h3>Others</h3><p>I have not test both generic design, but they should print just fine.</p><p>Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.</p>