Mini Glider "KAWASEMI" [BFX17-UsNFYT]　ver.1.5

thingiverse

Mini Glider "KAWASEMI" [BFX17-UsNFYT] ver.1.5 (Update 06-21-2020) Extremely compact, palmtop size. Ready for outdoor flight! Flight is possible if wind speed is 3 m/s or less. The T type has two distinctive fins characteristic of the head. The BFX17 series features a slightly thicker main wing compared to the BFX16 series. Print setting Recommended slicer: "Ultimaker Cura". 1. It's possible to output the printer modeling size in more than 110 mm up to 140 mm. 2. Please use a material with the same weight as an ABS filament or ABS. 3. Print Layer Height exclusive use: 0.05mm 4. Nozzle diameter recommendation: 0.3mm 5. Infill: Grid pattern / Density 25% (standard) 6. Build Plate Adhesion Type: Skirt Optional parts_____ Display Stand https://www.thingiverse.com/thing:3314331 Launcher https://www.thingiverse.com/thing:3312784 https://www.thingiverse.com/thing:3310727 Adjustment hooks https://www.thingiverse.com/thing:3314323 Cutter_scraper for all 3D printer https://www.thingiverse.com/thing:3006165 "KAWASEMI" [BFX16-UsNFY] ver.1.5 https://www.thingiverse.com/thing:3350319 Thank you. Mini Glider "KAWASEMI" [BFX17-UsNFYT] This is an original design rubber-band powered 3D printed glider. The T type has two fins characteristic of the head. The BFX17 series has a slightly thicker main wing than the BFX16 series. It features bird-like M-type main wings, U-type tail wings, multi-layered wing cross-sections, twisted frames, and double winglets. Outdoor flight is possible if wind speed is 3m/s or less. Due to its compact size, it can be output using a small ABS-compatible 3D printer. It can also be output on an ABS-spec BS01 or idbox! The minimum required layer thickness is 0.05mm, but since it's small, the output time will be relatively short. For details, please refer to the attached compressed file. Thank you.