Mini Fidget Paper-Steering Car

pinshape

My most recent design is a Paper Steering Car. This is assembled in 13 parts (9 3D printed, 1 paper clip and 1 slip of sturdy paper). I wanted to create a very small yet agile car. Small joints are difficult to 3D print, so in my design I decided to use sturdy paper instead. After a couple of days it is holding up very well! In addition, to make the car steer well, I incorporated Ackermann steering (look it up it's very useful). The car is only 4cm by 4cm and a super quick print! Check out my website, https://www.mattiatbutera.com for a more in-depth explanation or my Instagram https://www.instagram.com/mtb_3d/ for more projects! Recommendations: Print support for part 5 Make sure to print 2 right wheels and 2 left wheels Use a larger sized paperclip and divide it into 2, 17mm segments for the front axles and 1, 52mm segment for the rear axle Use strong glue to attach the front axles and paper Using pliers can help bend the paper clip Cut sturdy paper to the following dimensions: 10mm by 53mm Make sure to cut notches for the steering assembly The wheels work best on rubbery surfaces or carpets (slipping on small rubber bands can help supply grip on slick surfaces)