Mini Delta V6 Adapter - Inverted Effector

thingiverse

This is an attempt to create a V6 adapter for the Mini Delta, which also provides a provision for proper cooling. To achieve this, modification of the stock effector is necessary - removing 3-5mm of material from the back side to make room for the larger E3D heater block, and drilling three 3mm holes between each set of arms at each corner of the effector. The mount will utilize these holes to attach to the effector while the duct will use two existing holes. This mod does not affect your printer's z height; I've designed it so that the nozzle remains in the same position as the stock setup. Required Hardware: 1. 5 M3-0.5 x 8mm screws 2. 1 M3-0.5 x 16mm screw 3. 1 M3-0.5 nut 4. 1 5015 blower fan 5. 4 zip ties Future updates will likely include installation instructions and a version that utilizes two 4010 blowers instead of the single 5015.