Mini Action Camera Rig V2 Clone Slot

pinshape

This camera rig is an advanced version of the mini GoPro rig. The model shown was created with PLA but I would highly recommend using a more heat-resistant material such as PETG, Ngen, or PCTG if your rig will be placed in a hot environment for a prolonged period of time. It's common for the threads to print tightly so exercise caution when threading the hardware for the first time. If you have access to an 8-32 and 1/4-20 tap, use these to carefully cut the threads. If this is not available, you can carefully warm up the hardware with a soldering iron and screw it in. Check out its performance here: https://pinshape.com/items/441... To determine which style to print, try this test print: https://pinshape.com/items/441... The improvements made include: Adding threads to the upper handles so you can use standard hardware The base slot has been modified for GoPro clones (please note that these are shorter vertically than GoPro mounts, some sanding may be required to fit yours) It has threads for 8-32 hardware to hold a safety line for the camera The top slot has two holes in the top for a neck strap, as well as slots for accessory mounts. External hardware needed: 1/4-20 x 1" flat head screws (2) 115 size O-rings (14) https://www.mcmaster.com/#9452... Paracord or other material for neck strap (completely optional) Etsy Hardware pack link: https://www.etsy.com/listing/6