Milwaukee M18 Fuel Blower Attachment

prusaprinters

This attachment was modeled a couple years ago and I've have been using it ever since.  The first iteration (v6) was printed with PETG, which worked well except the tabs were somewhat delicate when the blower was dropped or the end firmly bumped against something.  The next iteration was with Prusament PC Blend, also v6 which was much more durable but eventually the tabs broke again (it was a significant impact).   V7 has wider tabs which I expect will be even more durable, possibly even with PETG.  The only downside to v7 is it's slightly more difficult to install on the blower, but certainly doable.The attached 3mf provides my print settings using a raft that works well.  However, if you use your own settings with a raft, MAKE SURE the ‘Raft contact Z distance’ is no more than 0.1mm, you might even consider less.  It seems the default changed from 0.1 to 0.25, I missed it, and the first v7 print failed.  The part separated from the raft, and unfortunately very near the end of the print hence the print in the photo being Urban Grey PC Blend instead of Jet Black that I no longer had enough of.I hope you find it useful.