Milspec Airsoft M4 LE-Style Stock

thingiverse

This is a Milspec LE-style stock for airsoft M4 toys that requires a spring and one M3 screw to mount. I designed it specifically for use with my JTW HCC-2A, but it should work seamlessly with any AEG using a Milspec buffer tube. You can easily download the JTW HCC-2A here: https://www.thingiverse.com/thing:3712294 M3 screw size is crucial, and you'll need an M3x12mm (which will also work with as small as 8mm). Spring dimensions are equally important - it should be 20mm long, 9.73mm in outer diameter, and 7.9mm in inner diameter (pretty common in variety spring kits). Here are the parts you'll need: * LEStock.stl * paddle.stl * pin_body.stl * pin_head.stl * pin_plate.stl There are two stock models available - a textured one with checkering on the shoulder pad, and an untextured one without checkering. The untextured one will be easy to print, but make sure the shoulder pad faces down to the bed. The checkered one may require printing front-down so the checkering comes out properly and doesn't cause issues with bed adhesion/supports. This stock is NOT guaranteed to be compatible with existing aftermarket stock pads and cheek pads. Assembly is relatively straightforward: 1) Print all listed parts. 2) Place pin_plate into slot at the base of the pin hole. 3) Place spring on pin_body. Install through hole in top of stock. 4) Push pin_body through pin_plate. 5) Install paddle. 6) Push pin_head on to the end of pin_body. 7) Drive M3 screw through pin_head and into pin_body. The dimensions of pin_head and pin_body are such that the M3 screw will thread itself into the plastic, so an M3 nut is not necessary. Please note that the pin may require light sanding to function flawlessly. For the buffer tube, please see this file: https://www.thingiverse.com/thing:3717605 This has yet to be tested, print at your own risk!