Millennium Falcon Navigation Chair - DeAgostini Version

prusaprinters

<p>Navigation Chair for the DeAgostini Millennium Falcon Hold area. This is a remix of the model by aasmaticsamurai. The file has been cleaned up a little in Fusion 360, rescaled to a larger size to fit the hold area properly and everything now sits on the print bed rather than hovering in the air.</p> <p>This is the chair in sections as the complete chair isn't very printable.</p> <h3>Print instructions</h3><h3>Print Settings</h3> <p><strong>Printer Brand:</strong> Ultimaker</p> <p><strong>Printer:</strong> Ultimaker 2 Extended</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.06</p> <p><strong>Infill:</strong> 100%</p> <p><strong>Notes:</strong></p> <p>Best to print at 30mm/sec or even slightly slower. I used an ABS/Nylon material and printed with a 4mm brim to make sure everything was held in place properly.</p> <p>This is a work in progress until fully tested/fitted on the DeAgostini model. I dont have the model myself so will update here once the person I printed this for comes back to me.</p>