Mikrotik hAP ac2 case

thingiverse

Case for Mikrotik hAP ac2 (RBD52G-5HacD2HnD) I didn't really like the case that comes with the hAP ac2. It has poor ventilation and after a year the rubber coated plastic gets sticky. I used this case as a starting point, thanks to the author: https://www.thingiverse.com/thing:4854866 Mods and additions made in TinkerCAD I used Cheps 0.28 extra fast Cura profile. You can use higher resolution for a smoother case, with increased print time accordingly. The hEX and hAP ac lite will also fit but note that the LAN ports are slightly wider on these two boards and you will need to adjust the .stl or just slightly file the LAN port opening. Note also that the hEX has a micro sdcard slot not provided for in these stl's. Before printing, I scaled the bottom plate in Cura to 99.5% on the X and Y axis, Z stays at 100%, for a slightly looser fit. A baffle for the LED's is included and can be fit with a dab of superglue if desired. Two bottom plate stl's are included, a smooth one which I use with the provided stand and one with slight indentations to place stick on rubber feet if desired for horizontal placement of the unit. I do like using the stand and placing the unit vertically as it provides better cooling.