MicroUSB Pinboard Case

prusaprinters

<p>This is a case for <a href="https://grabcad.com/library/micro-usb-dip-5-pin-pinboard-2-54mm-1">Conrad Bannik's Micro USB DIP 5-Pin Pinboard</a>.</p> <p>Note that the screw holes to mount the board is offset with 1mm because the Conrad's model does not fully match with the pinboards I have.</p> <p>The model is parameterized, so if you don't like the tolerance or other dimensions you can open the .f3d in Fusion360 and change them.</p> <h3>Print instructions</h3><p>Rotate the top part upside down, and print both parts without support. The top is designed with a sacrificial layer in the screw hole to eliminate support.</p> <p>After printing remove the sacrificial layer from the screw hole in the top part.<br/> Use 2pcs M2x4 screws to mount the pinboard to the bottom.<br/> Use 1pc M3x4 screws to screw the to part to the bottom.</p> <p>Enjoy! :)</p>