MicroSwiss Adapter for Bondtech DDX V2 Creality CR-10(S)Pro/Max

thingiverse

<p>Upgrading the hotend to Micro Swiss on a Creality with DDX V2</p> <p>To use with:</p> <ul> <li>Bondtech DDX Direct Drive eXtruder for Creality</li> </ul> <p>This set is necessary to install a Micro Swiss All Metal hotend on a DDX Direct Drive eXtruder for Creality Upgrade Kit v2 and following.</p> <p> </p> <ol> <li>Keep the Micro Swiss bowden tube black clip on the hotend but remove the C clip, it help center the Bowden tube into the hotend.</li> <li>Before you start, you have to sand the corners of the microswiss part until it fits on the Bondthech hole (center the part and keep trying until it reaches the bottom)</li> <li>Assembly the part with the Bowden tube already fitted and leave only 5 mm (cut the excess) of Bowden tube from outside the part.</li> <li>The wall from the adapter part with the holes is faced to the machine side (facing the back)</li> <li>Follow the BondTech instruction to install the DDX V2</li> </ol> <p> </p> <p>BondTech DDX</p> <p><a href="https://www.bondtech.se/en/product/bondtech-ddx-for-creality-cr-10-pro-max/">https://www.bondtech.se/en/product/bondtech-ddx-for-creality-cr-10-pro-max/</a> </p> <p> </p> <p>MicroSwiss Hotend</p> <p><a href="https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro">https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro</a> </p>