Microscope RMS shims / washers

prusaprinters

<p>This is a set of shims for RMS /DIN microscope objectives.</p><p>Yes they are simply rings, thechnically they are washer or shims.<br>Here uploaded a set of them with thickness 0,1 - 0,2 - 0,3 - 0,4 - 0,6 -0,8 -1,0 - 1,2 - 1,4 _ mm<br>Inner diameter is 20,4mm, outer 26mm. They should fit well on RMS objectives.</p><p>They are used between the microscope objective and the nosepiece, to finely adjust the parfocality. In the photo, see a microscope objective with a 0,6mm shim on it.</p><p>Thickness will not come out exact, due to the printer's small errors, so I suggest to print a bunch of them and try them out. Don't worry if they come out wavy, they're so thin, once screwed in they will flatten.</p><p>PLA is ok. do not print a raft/brim.</p><p>&nbsp;</p><p>Supreme design skills!!</p><p>&nbsp;</p><h3>Print Settings</h3><p><strong>Resolution:</strong></p><p>0,1</p><p>&nbsp;</p><p><strong>Infill:&nbsp;</strong></p><p>100 - 50%</p><p>&nbsp;</p><p><strong>Notes:</strong></p><p>Do not print a brim. put the height resolution as small as possible, ideally 0,1 mm or multiples/fractions of it.</p><p>&nbsp;</p><p>Category: Parts</p>