microscope adjustable stand

thingiverse

This is a high-adjustable stand for a USB microscope. The total height with the optional rubber foot is 230mm. If you found this design very helpful or wish to support me, you can buy me a cup of coffee (helps keeping my brain active so I can create new stuff); then please consider using this link: https://www.buymeacoffee.com/Mb1vZjXUG What you need to assemble this is: 1. 1 pc M5 x 12mm hex cap head bolt 2. 1 pc M5 nut 3. 2 pcs ballbearing 8x16x5mm The arm that holds the microscope has to be inserted first in the middle of the tower, it has to go in with one side first and then the other can be pushed in, insert then the lower ballbearing, then insert the rubber spacer plate in the back and then insert the spindel rod, remember the ballbearing in the top piece before pushing it in the tower. The rubber foot and the rubber spacer plate were made from NinjaFlex; the rest is normal PLA. The USB microscope can be obtained here: https://www.aliexpress.com/item/Vastar-Mega-Pixels-500X-1000X-1600X-8-LED-Digital-USB-Microscope-Microscopio-Magnifier-Electronic-Stereo-USB/32861880407.html