Microphone stand

thingiverse

I created a mic stand to complement the Rode SM6 shock mount with NTK mic, but it will work for any shock mount or microphone with an M10 thread. I recommend checking your printer's calibration before printing by creating a test print of an M10 bolt using this link: https://www.thingiverse.com/thing:633534/#files. To achieve the best results, I used the following print settings: 0.2mm resolution with 30% infill at 4000mm/min for the first 110mm high, then switched to 100% infill at 2800mm/min until the end of the print. This ensures the threaded rod at the top is both strong and accurate. After printing, I recommend cleaning the thread with a die or M10 nut to remove any plastic residue that could interfere with the thread's function.