Microphone Stand DIY kit 3D print model

cgtrader

This stand supports a tiny electret condenser microphone. You can build your own custom stand around the miniature mic. The specs of the suitable condenser microphones measure about 6 mm in diameter and just 3.5 mm thick, or no more than 4 mm. Adjusting the gap on small models might require spacers for perfect spacing. ABS plastics has toughness and is the perfect material to use in printing this stand due to its rigidity and resilience. High accuracy mode should be used while setting the printer (at least 0.1 mm of precision being ideal). About Assembly First, attach a shielded cord securely to the electret condenser microphone and thread it through the body. You can also try to make sure the wire gauge is smaller than 2 mm. Once in place, simply place the mic into the protective cap while sealing both together by applying some adhesive. Don't forget to adhere the add-on piece securely as well. As for finishing touches, carefully set the base plate firmly and slowly so as not to cause breakage or peeling. The area is sensitive; adhesion between pieces might lead to issues in printing and possibly crack when being moved around if materials used were improperly bonded. Dimensions of Each Base (given in millimeters): 29 (h) x 25 (w) (plate #1 base) 40 (d), h= 40(w) 3 x units: mm It's printed on a FLASHFORGE ADVENTURE, so some level detail can be expected when complete, polished with finish applied. Thank you for checking this out!