Micromelon Digger Attachment
thingiverse
Complete more advanced challenges with the Micromelon Digger attachment. Powered by 2 small 9g servos connected to the Rover's servo connectors. You will need ========== 1x Micromelon Rover 2x 9g metal or plastic gear servo motors (with included screws) 2x M3x12mm screws 2x M3 Nuts 2x M2x5mm screws Assembly ========== You will need to cut the servo boss (plastic part) to fit the cutouts in the left arm. Use a pair of side cutters to do this. Insert the 2x M3 Nuts into the hex sections on the inside of each motor cavity, then insert both motors into their holders, feeding the cable through the rectangular hole at the back of each. Screw the right arm on first using the 2x M3 screws. Then use the M2 screws to screw through the left arm, through the servo boss and into the servo motor. Connect the motors to the rover using the Servo connectors on the back. Pay attention to the orientation of the connector. To get started using the motors in the Code Editor check out the blog post on servo motors at https://micromelon.com.au/resources/
With this file you will be able to print Micromelon Digger Attachment with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Micromelon Digger Attachment.