Micromake D1 Detachable Effector

thingiverse

I created this because I want to get a laser and attach other items to my Delta printer. Delta push rod arm separation spacing = 42mm Hot End = E3D V5, (I am not sure if it will fit the V6 "Probably Not"). I am currently testing it on my Micromake D1 and it's working really well for me. I've made some changes after my print and this is still untested but should improve the overall design. There's no offset on the parts, so you'll have to clean them up to fit. I prefer it this way - it makes for a solid part when assembled. All the holes can be tapped or enlarged - that will be up to you. You only need some M3 nuts and bolts, long and short. For the AirDirectAddon, you'll need some 15mm M3 bolts with small heads so it doesn't hit the bed when printing. I printed the MainBase upside down with only a little support structure from the bed. Changing my stock effector to this didn't improve my print quality. I found that lowering jerk and acceleration settings makes for a good stable printer. There's no Z probe that will fit the printer if the big air directing part is installed. I've found that manual z probing works really well for me. If you're interested, I'll add a link below. MANUAL Z PROBING FOR THE MICROMAKE D1 URL https://github.com/Bougakov/Micromake-D1-3D-printer/blob/master/calibrating.md I added a smaller air directing part - more like the stock d1 version. It will allow for a detachable z probe to be mounted. I've created a z probe as well.