Micro Water Pump - 21 mm motor housing and alternative impeller design
thingiverse
This is a remix of Functional Micro Water Pump by Arron_mollet22, and I'm grateful to him! It's designed to house a 21mm R140 DC motor or any other motor with a diameter of 21mm and a modified impeller design that I've found to be more effective. I didn't think this pump would work, but I was wrong. This pump cost me less than one euro and could replace the high-consumption 10 euro pumps I currently use for my IoT projects, even when powered by a 1.5V AA battery! The new impeller should theoretically be slightly more powerful than the original design but also a bit more susceptible to dirt. After some tests, I found out that my design produces fewer bubbles. Download "Remixed_Impeller" for my design. I used a R140 motor which you can get from AliExpress for 0.60 dollars - https://bit.ly/2TZPcE8 . I used PETG for its water resistance and flexibility (you may use TPU or else for the gasket). Download and print "Remixed_R140_Housing" if you use a R140 motor or "Remixed_Housing" if you use some other motor (with a diameter of 21 mm). The second file could also work for R140, but the first will make it more stable. You only need support for the Pump_InOut thing. Click "View Original" to see a .gif of this pump functioning, powered by an AA battery.
With this file you will be able to print Micro Water Pump - 21 mm motor housing and alternative impeller design with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Micro Water Pump - 21 mm motor housing and alternative impeller design.