Micro Swiss Direct Drive for Ender5 - Smooth Fang incl. EZABL

prusaprinters

<p>Redesigned the backing plate, cable arm and EZABL Pro mount to fit my Ender 5 Pro with the Micro Swiss Direct Drive kit and all metal hot end. Will also work for Ender 5 of course.</p> <p>The EZABL Pro screw mount is somewhat thin given you have to design around the Fang and I also pushed it out a little to miss the roller bracket on the left for full use of the bed. Despite it being thin, it has been working great even printed in PLA. Just be careful not to over tighten the screw. Would recommend PLA+ or stronger filament for long term durability and temp resistance.</p> <p>I'm posting up the full kit - Fang, Backing Plate, Cable Holder, Fan Mount and EZABL Mount for one stop sourcing. I had to piece this together originally and then ended up modifying after realizing the Ender 3 stuff didn't fit my Ender 5 MS kit. I designed it so each piece is independent so you can just print what you need if something happens and to make it more modular for updates.</p> <p>No supports should be required. The bed layout picture is just to see all the parts at once. Recommend you split the Fang out on it's own at 0.15 for aesthetics and use a thick brim to hold it up right during printing. The rest can all be printed together with no brim or supports.</p> <p>Note: When mounting the 40mm fan mount to the Fang, put the screw most of the way through the fan mount and then line it up with the Fang hole. It will be at an angle at first but then will snug up and level as you tighten it down. Makes for a tight fit that works great.</p> <p>Happy to reduce the hole size in the EZABL Mount for the smaller (non Pro) EZABL as well if anyone needs it.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p><strong>Printer:</strong></p> <p>Ender 5</p> <p><strong>Rafts:</strong></p> <p>No</p> <p><strong>Supports:</strong></p> <p>No</p> <p><strong>Resolution:</strong></p> <p>0.15-0.2</p> <p><strong>Infill:</strong></p> <p>40</p> <p><strong>Filament:</strong> eSUN PLA+ PLA+</p> <p>Black &amp; Orange</p> Category: 3D Printer Parts