Micro SD extension card holder (for gluing onto other parts)

prusaprinters

<p>This is a remix of a very simple Micro SD card holder.</p> <p>First I planed to merge a holder with my filament guide (<a href="https://www.thingiverse.com/thing:1915337">https://www.thingiverse.com/thing:1915337</a>) but then I realized that printing of such a combined part would be not very easy. So I removed the "legs" of this holder and glued the printed part onto the filament guide.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Anet A8</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>The initial designer created the holder very tight. The width for example of these parts are mostly 25mm. The thing has 25.2mm room to fit the width. I would recommend a scaling of 102-103% to get something like 25.5-25,75mm if you don't plan to let the SD card extension for ever there..</p> *Update:* I think, that printing the part with the cable bushing down (and not as it is right now oriented) would be better because then you will not need supports at all! But then a brim would be useful and needed. </div></p> Category: 3D Printer Accessories