Micro Lathe Dremel

prusaprinters

<p>This is kinda remix or thing inspired by:<br/> <a href="https://www.thingiverse.com/thing:1751658">http://www.thingiverse.com/thing:1751658</a></p> <p>I started with different way of Dremel attachment and decided to redesign the whole thing.<br/> I added a knob to threaded rod. There is slot for a small piece of 1mm thick metal sheet that goes to the slot in threaded rod. You can glue the knob on rod after you assemble the whole thing. There is a M6 nut soldered on rod on the other side.<br/> In the chuck part, there are three plugs to cover the rods. Glue them in with superglue.<br/> I designed two types of Carriage. One is the same height as the Chuck/Stock axis. The V2 is smaller and you can put some adapter on it.</p> <p>OpenSCAD files are included. Chuck file uses "nuts and bolts v1.95.scad" library. Knob uses "children.scad" example from advanced examples inside OpenSCAD program.</p> <p>You need some hardware to complete this thing.<br/> 4 pieces of M3 screws and 4 M3 nuts.<br/> One M6 nut and a piece of M6 treaded rod.<br/> One 608ZZ 8x22x7 bearing.<br/> Two 8mm rods.</p> <p>Printed on PRUSA i3 MK2. I used PLA<br/> I added few pieces that are meant to be removed. The big circle that prevents Stock and Chuck parts from lifting and warping during print. Also there is a "support" barrel inside the hole for bearing. That should pop of after printing done.</p> <p>For more info look at the oroiginal thing.</p> <h3>Print instructions</h3><p>Category: Machine Tools</p>