Micro FPV Quad-racer 2S 90mm polycarbonate

thingiverse

The ultralight and airy design of the 90mm frame is made possible by the solid strength and stiffness of polycarbonate. Be extremely cautious in flight with other filaments as they may not provide sufficient stability. The frame is constructed from polycarbonate, Ultimaker 90 mm center distance, featuring a flight controller SP Racing Evo. It's fully customizable and cleanflight compatible on all flight modes. F.C.: http://www.banggood.com/fr/Eachine-32bits-F3-Brushed-Flight-Control-Board-Based-On-SP-RACING-F3-EVO-For-Micro-FPV-Frame-p-1076530.html?p=LD020411878172015024 Coreless: http://www.banggood.com/Chaoli-CL-820-8_5x20mm-2S-Coreless-Motor-for-90mm-150mm-DIY-Micro-FPV-RC-Quadcopter-Frame-p-1084265.html?p=LD020411878172015024 Protection Insulated Rubber Ring for FPV Racer: http://www.banggood.com/fr/20-PCS-3MM-5MM-6MM-8MM-10MM-Short-Circuit-Protection-Insulated-Rubber-Ring-for-FPV-Racer-p-1075031.html?p=LD020411878172015024 Receiver: http://bit.do/DSM2-5CH-2-4Ghz-RC-Micro-Receiver-With-6-CH-PPM Camera 25mw: http://www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html?p=LD020411878172015024 Camera 200mW: http://www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html?p=LD020411878172015024 Lipo: 300mah, 2S - +/- 3-4 minutes flight time. Screws: 4 x M1.6 x 5mm. The lipo fixing part is glued to the frame. At the time of gluing, move the lipo fixing on one side as the antenna and its protection are in the passage of the propellers. The Camera 25mW and 200mW mentioned above may be compatible with camera protection. A flat top cover larger and larger is being prepared, and it will be compatible with the greatest receivers. https://www.facebook.com/Microdure/ Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: Yes Supports: Yes Resolution: 0.100 mm Infill: Polycarbonate Ultimaker