Mickey Wall Hook
prusaprinters
<p>I didn't see any good Mickey wall hooks, and we are doing a Disney bathroom, so I designed a wall hook with a Mickey silhouette.</p><p> </p><h5>Printing Notes</h5><p>Recommended to print with ABS, PLA+/ToughPLA or PETG for strength. PLA may not work.</p><p>No supports, rafts, or brims needed. (There are 1-2 layers that are about 60 degrees from vertical so depending on your printer, a bit of sanding may be required on the top inside of the hook if it gets a little chunky like mine did.)</p><p>30% infill or more recommended for strength and durability.</p><p>I printed mine with PETG / 30% honeycomb infill and the hook feels like it can easily support 10-15lbs. You'll probably reach the drywall anchor limit before the hook actually breaks off.</p><p> </p><h5>Mounting</h5><p>Should fit most sizes of drywall anchor screws or wall bolts. <strong>A drywall anchor or stud mount is recommended</strong> so you don't rip a hole in your wall... who knows what your kids are gonna hang off this thing? :)</p><p> </p><h5>Fininshing</h5><p>Recommended to finish with some type of glossy coating (resin, epoxy, varnish, etc), especially if you hang it up in a bathroom with a lot of moisture.</p><p> </p><p> </p><p>Category: Organization</p>
With this file you will be able to print Mickey Wall Hook with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Mickey Wall Hook.