Mic Stand Knob

prusaprinters

<p>I've lost a few knobs off my mic stands in the thirty+ years I've been making Celtic music: the local music store never has replacements, and in any case stock knobs are too small for my arthritic hands to get tight enough to really hold a mic in place. As usual, 3d printing to the rescue!</p> <p>These prints are just the knob portion: you'll need 6mm hex bolts for the rest, I use 6mm x 25mm (about 1" long). (The guy at the hardware store may try to tell you the bolts are 1/4": don't believe him!)</p> <p>Note: the hex socket on the knob is just a little too small. This is deliberate: use pliers to squeeze the hex head of the bolt into the space, and it will hold tight. Heat the knob a little if you need to soften the plastic the fit the bolt in.</p> <p>There are two versions: a 20mm (just under 1", about the stock size) and 26mm (just over 1") for easier gripping.</p> <h3> Print Settings</h3> <p><strong>Printer:</strong></p> <p>FLSun 3D Cube</p> <p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>Doesn't Matter</p></div><strong>Supports:</strong></p> <p>No</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.1mm</p></div><strong>Infill:</strong></p> <p>15% gyroid</p> <p><strong>Filament:</strong> doesn't matter PLA black, of course!</p> </p></p> Category: Replacement Parts