MiBand 6 minimalistic charging stand

prusaprinters

<p>Minimalistic holder/stand for MiBand 6 serves for stable charging without tangling all this stuff together. Also, free hanging cables attracts cats, so this gadget can be called cat-protector.</p><p>You'll need:</p><ul><li>bolt M3x12 + nut</li><li>small zip tie</li></ul><p>Print instructions:</p><ul><li>no support needed, print in your favorite material</li><li>pause print at 9mm, then insert nut into body1</li><li>tip - you can print it with nozzle 0.6mm, and it will be even faster</li></ul><p>Assembly:</p><ol><li>screw both part together with bolt</li><li>insert magnetic connector into hole, carefully adjust the position before pushing</li><li>wrap cable and secure it with zip tie, don't tighten it yet</li><li>push the usb connector through the hole, then push it into place</li><li>align the cable and tighten zip tie</li><li>in case of loose usb connector, you can secure it with a bit of hot glue</li></ol><p>Done, enjoy charging without tangled cables :)</p>