Mi Home Camera 360 support (Xiaomi)

prusaprinters

<p>I put my security camera on a tall closet, but I couldn't see the whole room, so I made a 20° support to compensate the missing angle.</p> <p>All you need is the two printed components and 2 wood 3x16mm screws.</p> <p>Note: the lock has 4 holes in order to be repurposed. For this mount you only need two.</p> <h4>Slicer Settings</h4> <p><strong>Support</strong></p> <ul> <li>0.3mm layer thickness</li> <li>1.2mm walls</li> <li>0.9mm top/bottom</li> <li>20% infill for the support</li> <li>speed 60mm/s (30mm/s on the walls)</li> </ul> <p><strong>Lock</strong></p> <ul> <li>0.15mm layer thickness with adaptive layers</li> <li>1.2mm walls</li> <li>0.9mm top/bottom</li> <li>30% infill</li> <li>speed 40mm/s (20mm/s on the walls)</li> <li>Brim</li> </ul> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Eryone Thinker SE</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p><strong>Filament:</strong></p> Eryone PLA <p>White</p> </p> Category: Camera