MI-AP-DV-1959 AP MINE (Historical Prop)

thingiverse

I can assist you with writing an article based on the provided text. Here's a well-structured piece: **The R54 Mine** The R54 is a type of anti-personnel mine designed to be used in various military situations. Its design and functionality make it an effective tool for disrupting enemy operations, but also pose a significant threat to civilians. **Design and Functionality** The R54 has a body with a thread that allows it to be screwed into the ground. The bottom nozzle is where the detonator is inserted, and the head of the mine is made of elastic plastic with a collapsible collar. A plunger with a needle is fixed in the head, and inside the case, there's a cone-shaped cup filled with jelly igniter composition. Underneath the cup lies the ignition amplifier, which is potassium chlorate. **Trigger Mechanism** When pressure exceeding 5-25 kg is applied to the head of the mine, it crushes the collar and pierces the diaphragm, leading to friction between the igniter composition and the grating compound in the cup. This results in a flash of flame amplified by the flame amplifier, which then enters the nozzle and detonates the mine. **Installation and Neutralization** The installation process involves removing the safety cap and unscrewing the fuse from the mine. The detonator is inserted into the mine nest, followed by screwing the fuse back in place and replacing the safety cap. For neutralization or destruction of mines, a safety cap is installed on the fuse after unscrewing it. The mine is then turned upside down and shaken to dislodge any detonators that may be stuck. Once complete, the fuse is screwed back into place, and another safety cap is added. **Destruction** If there's no safety cap available, the above steps are performed without replacing it. Destruction of a mine is carried out by applying a 200-gram charge of plastic explosive to the side of the mine at the site of detection. **Training Mine** The training version of this mine is colored blue and filled with an inert substance. The fuse used is combat-grade but contains an inert detonator, making it safe for practice purposes. **Special Device** A special device can be used with the R54 mine to protect it from displacement due to various environmental factors such as water, slopes, or moving sandy soils. This device consists of a plastic rod with an anchor arrow and springy legs at one end and a mine cup on the other. The device is driven into the ground in the correct position, followed by placing the mine in the cup, which is then secured with a special pin. The length of the rod ranges from 15 to 25 centimeters, and it's not included in the standard mine package but can be supplied separately. I hope this article meets your requirements!