MGN12 Tevo Tarantula Y-Axis Mount

thingiverse

I liked the original design so I chose to tweak it a bit. BOM: 1x Printed MGN12 Y-Axis Carriage 4x M3 x 10mm 4x Heatbed adjusting screw [from old assembly] 1x Heatbed [from old assembly] 1x Acrylic Heatbed Mounting Plate [from old assembly] 4x Screws with nuts [from old assembly] INSTRUCTIONS: 1) Remove the old heatbed and carriage. 2) Attach MGN12 rail to 2020 profile using at least 3 T-Nuts 3) Mount Printed MGN12 Y-Axis Carriage to carriage block with four M3 x 10mm screws. 4) Install Acrylic Heatbed Mounting Plate on Printed MGN12 Y-Axis Carriage with four salvaged screws and nuts. 5) Install heatbed using four Heatbed adjusting screws. Check the heatbed's correct adjustment. Done! DESCRIPTION: This part saves z height over the original due to recessed screws (the ones used to mount MGN12 adapter to MGN12 carriage block). Also, belt is attached at an angle if you use Motor Mount and Y Axis Tensioner from Banholm. So I lowered it a bit, now belt is perfectly parallel to MGN12 rail. Belt Tensioner: https://www.thingiverse.com/thing:1704100 Motor Mount: https://www.thingiverse.com/thing:1704123 ADDITIONAL INFORMATION: .iges file is also available for download if you want to modify the part.