Metric tap and die case

prusaprinters

<p>This is a remake of alaubham 'Tap / Die Tray for 12 Piece Irwin Hansen Metric Set'. I added the small slots to make access to the parts and added a cover case. The cover was printed in PLA and the tray with PETG because that is what I had. I do not think the material makes any difference.</p> <p>The 2.25" x 4.25" data-sheet is handy. I give the drill size for the metric taps. I got the information from engineering tables and rounded them. Most of us do not have the actual drills suggested so I picked something close but even the 'close' will not be something you have - just do the best you can without over boring the hole.</p> <p>5-10-2021 As a request, I have made a metric and SAE cases. I have never printed these objects. They should be printed as shown.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Prusa Mk2</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>standard</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>30</p></div></p> <p><strong>Notes:</strong></p> <p>5 perimeters and 6 upper and lower layers. Print objects as I have them in stl files and there will be no problem. There is an indent on the top side to put the Metric Tap guide sheet.</p> <p>The printable sheet is included and will easily print on your color printer. Laminate the paper on both sides with plastic laminating sheets - Staples has them. Glue the laminated sheet to the box with a VERY SMALL AMOUNT of hot melt glue.</p> </p></p></p> Category: Tool Holders &amp; Boxes