Meshtastic RAK board magsafe enclosure

prusaprinters

This is a RAK Wizblock enclosure designed to be made as a MagSafe adapter for an iPhone which is powered off a cable from the USB-C iPhone (this is a feature only of the iPhone 15 and newer). This model is designed specifically for the USB Micro on the RAK board, but I've made the opening larger to accommodate the USB-C model as well. (Please comment if you have any issues with this and I can revise the file)This will accommodate both the stock bluetooth antenna, and the GPS antenna. For the threaded inserts, I've used M2 x 4mm around the edges, and M2 x 2mm on the corners of the board. The screws I used were M2 x 8mm on the edges of the enclosure, and M2 x 4 for securing the board. You could also use some tiny self tapping screws to replace any of the screws intended for threaded inserts, but that's up to you to decide sizing. All the holes are 2.8mm in diameter.The M2 threaded inserts I used were from this kit; https://a.co/d/evHGmv7The adhesive magsafe backer I used was this; https://a.co/d/i76mhClThe antenna cable I used; https://a.co/d/05txJjNFor the cable, if you find any USB-C to Micro or USB-C to USB-C depending on what model RAK you have. Here's the one I used; https://a.co/d/bdeYE1C Supports are not required for this.