MERDE THE PIGGY BANK, A BOX IMPOSSIBLE and LOCKED

cults3d

Here I offer you a money box with bayonet closure, in the design of "BOX IMPOSSIBILE". For the front and back there is the Whats App Popp SHIT / Merde. To fulfill the function you must be sure to print the BACKFACE and stick it to the box. With two bolts you can lock the lid on the box/can. But you need a small screwdriver and the correct position of the slot of the bolt. The bolts are set in two versions. Both need support. One version has a surface to print lying down. The round bolt is printed standing up with a lot of BRIM. The second left bolt is the mirror image of the right. If you print two identical studs, you have immediately introduced another alignment code. Now you just have to remember well how the bolts must stand!!! Parts height, (set up) is approx 150 mm. Box thickness approx 92 mm I like two different colors better than a single color print. I like to print in light and dark brown. For pictorial representation of lid part to the can, I specially chose discordant colors. Mouth and eyes you can paint in color. If you prefer to print, there are inlays for the mouth and eyes. Note: Mouth and eyes are not symmetrical, please pay attention. The back merde face, including inlays is the mirror image of the front face. After printing, pay attention to which part belongs where. The front face is glued to the lid. The mirrored face with the can. Tip #1: Please grease the two bolts with petroleum jelly. Then they will run more easily. Unless it is desired that it goes hard. Tip #2: If you are printing something elephant feet, glue the lid to the face first. Only now remove the burr. This way you won't have such a big groove between the lid and the face. Enjoy your own Merde money box.