Mellanox ConnectX-2 Half-Height Bracket

prusaprinters

<p>This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards.</p><p>This is a remix of <a href="https://www.thingiverse.com/thing:2836187">rasarmg's “PCI Bracket Generator” on Thingiverse</a>, and is only a very small addition to it. If you need custom PCI brackets, check there.</p><h3>Editing</h3><p>Included is the OpenSCAD file for this, which is indeed very small tweaking on the file from rasarmg. It requires a copy of <a href="https://github.com/royasutton/omdl">omdl</a>, and I had used 0.6.1 in this file - newer versions may work, but it is probably simplest to <a href="https://github.com/royasutton/omdl/tags">grab the old release</a>.</p><p>Please do not sell this model without contacting me first.</p><h3>Printing</h3><ul><li>Rafts: no</li><li>Supports: yes, “on build plate only” should be sufficient.</li><li>Infill: N/A</li><li>Layer height: anything (0.2mm works fine)</li><li>Material: PLA (PETG/ABS may also work, but there is a non-trivial bridge which would need support)</li></ul>