MegaTronXY X1

thingiverse

This is a 3D Printer Project I wanted to build because the current nice-priced 3D Printers were great at $150 up to $200 for a standard 220x220x240 or 8"x8"x9" or 8"x8"x11". However, the parts I needed printed required printing in sections. And for most of my Major Parts that would be 8 parts @ 4 hour prints or 32 hours of printing. So I decided to use my other 2 3D Printers as parts to make a larger and extra strong 440x440x300 Printer where I can print the parts I need in one print. So I am using my Remaining Delta Kossel 180x330 Printer to print the parts I need. So all the prints listed in the Project were made on the Delta Kossel printer which I will be upgrading to a 330x330 printer. I'm also going to use and remix current Anet, Tronxy and Pursia Printed parts and mod them to work with my Project. As of 5/24/2017: Final got the printer put together, did a dry run and worked great. Now I have to print a few more items, enclose it and it will be ready to start printing my Comic-Con items in one print. Next project will be to upgrade or make my Kossel Delta Printer Larger from a 180x300 up to 220 maybe even 330. As of 5/31/2017: Printer is working and printing my larger Items. The above printer all parts were made from ABS at 240 Hotend, 110 Hotbed and .2 mm at 80% infill with a .5 mm Tip. Final part is a 1/2 inch PVC Frame with Corrugated side panels. I've replaced the old Thermostat with a 25A Expansion Board General Heated Bed http://www.ebay.com/itm/172569448851. Final step will be to add extra Lighting inside the cabinet with a remote camera to view progress. I'm sure everyone here knows how to add extra Lighting and a camera for remote viewing. So there will no need to add them. Good luck in your build, hopefully this project will help you decide what you need. I've added a video link so you can see the printing process. https://www.youtube.com/watch?v=ccp7_7hjijc&t=4s