Meeple Star

thingiverse

You'll need to insert your own light or Christmas lights within. Print all components, I've added square blocks that allow you to stick your Christmas lights wire into place (you'll have to attach them with glue to the flat side), or simply glue the lights directly onto the meeple's side. Run the lights through the hole in the large meeple, then secure the lights to the thin meeple's side, insert the cylinders into the indent on the thin meeples' hands (glue them in place). This setup allows you to open it up if necessary for access inside. I printed at a 2.4 layer height with 205 degrees Celsius using white PLA material. A 10% infill is recommended, but you can opt for 0% if desired. Do not print the large meeple side with supports as this will result in a blemish that shows through when the lights are illuminated. The cylinders on his hands may print slightly imperfectly, but they should bridge and won't be noticeable once assembled anyway. If you do use supports, it will mar the interior surface, making any light leakage visible.