Meeple dice tower

thingiverse

Intended for dual extrusion, using both colors simultaneously can result in a stunning effect. However, if you're working with a single color, simply disregard the instructions for separating connected meshes. The tray is an optional component that comes in handy when printing. It seats tightly and securely, ensuring your print remains stable throughout the process. Print Settings: Printer: FF Creator Pro Rafts: None are required Supports: Not necessary for this design Resolution: A resolution of .200mm provides crisp and clear details Infill: The tower has a moderate infill rate of 35%, while the tray is solid, with an infill of 100% Notes: * Print the tray as it is, without any modifications. * Lay down the print tower to achieve the best results. Post-Printing: For a professional finish, cut the acrylic for the front using Tinkercad's reference image. A thickness of 1/8" would be ideal. To attach the components, locate the small holes in the tower, approximately 2mm in diameter. Enlarge them with a drill to match your available screws, ensuring the hole is just slightly smaller than the screw's outer diameter. This allows for a secure fit without compromising the thin wall of the PLA material.