Medtronic Paradigm 7 Series Belt Clips

prusaprinters

<p>I wanted a printable pump clip that didn't have layer line weaknesses, so I designed the horizontal clip for myself. A couple other diabetics requested variations.<br><br><br><strong>Print Info</strong><br>All print without support, enable bridging in your slicer if it's not on. If bridging droops too much with your printer, enable bed only supports.&nbsp;<br><br>I suggest printing this with wider extrusions for strength. If you're using a 0.4mm nozzle, I'd recommend setting your line width to 0.6mm. If you are using a 0.6mm nozzle, 0.9mm line width produces a very strong clip. This prints fine with your standard settings too, if you don't want to mess with settings.<br><br>Mine is PLA, but PETG should also be good. ABS is likely too weak in a thinner print like this, and I'm interested in trying this in TPU, let me know how it works if you do.<br><br>0.20mm to 0.35mm layer height print well and are strong, layer heights below 0.2mm will reduce the clip's strength.<br><br>The separate clip may require scaling up/down in your slicer by 1-2% to get a tight fit, or use superglue to permanently join them.<br><br><br><br><br>&nbsp;</p>