Medieval torch - Fully Printable

thingiverse

I remixed the 'Medieval torch' by Caputsic to include the upper and lower tube as printable objects. I was worried about the cardboard being indented by others who didn't know better, so I made it all 3D printable. What I've adjusted: The 'Lower Tube' includes the end cap and threads at the top connected by a tube. The 'Upper Tube' includes the lower threaded coupler, a tube, and then the upper coupler with a non-threaded post. This post feeds into the bottom of the 'Cone'. It's loose enough that you can wrap a 2 thick electrical tape around it, and twist/pressure fit into the cone, so it can come apart. The cone has a bit of a rectangle indent out as I wasn't able to find AA battery holder that was in a one on top of the other, only side by side with a rectangular box (https://www.amazon.com/gp/product/B076C7S2VN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1). This cut out + the rectangular cut out for the light base made everything fit well. The Light base has a rectangular cut out to help fit the battery pack. For assembly, I used electrical tape to make the connection between the Cone and upper tube snug. I used Velcro to connect the 'Light base" to the inner set of the cone, so that the light could be pulled out which is how it gets turned on/off. I hot glued some blue ribbon through the LED light to the base of the Light base to make it easier to pull the light out without pulling on the LEDs. I tried to grab some pictures to show how I did all this. Instead of using the light defuser, we bought some blue acetate sheets from Michaels, cut them and heated them lightly with flame to create the flame effect. As well, part of the pressure fit between the cone and upper tube was so that we could use out modified torch stand design to connect them to the wall holder. The wall holder is a remix of the 'Medieval Torch Wall Sconce here: https://www.thingiverse.com/thing:6257503I did not modify the vertical strut, so you'll have to go back to the original to download those pieces, along with the middle and upper ring