Mechanical carousel with horses

prusaprinters

Attention Upgrade !! - improvement to the motor version You only need to print two parts, buy the N20 Mini Metal Gear Motor and a box for two 18650 batteries. I will add a link to buy.The motor is suitable with a speed of 30-50/min. I bought more motors for another model, but they helped me hereThe height of the motor body with gears should be 25 mm without the shaftN20 Mini Metal Gear Motor :https://www.aliexpress.com/item/1005005954869500.html?spm=a2g0o.order_detail.order_detail_item.6.1a9bf19c0GkSGJBattery 18650 box :https://www.aliexpress.com/item/1005003772436297.html?spm=a2g0o.order_list.order_list_main.180.3fea1802D5ZTaWJust add these parts :Put the new part under the carousel, insert the motor connected to the cables and add the gears ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ As already mentioned in the competition entry, I created a mechanical model and tried to make the aesthetic side stand out as well. I hope you will like the carousel model. You can move the model in different ways - spin from the side by the gears or from above through the top. More experienced modelers can bring this model to life with motorized movement .Horses move in 3 directions - back and forward,  around their axis  and up and down.  Update!! Added stl files of all parts of the model, I hope everything will be fine, if not write, I will fix itTvrdé: Použil som 9 kusov ložiska 608zz- / 8x22x7mm / ložisko vyrobené z inline lúča a 1 kus 6903zz / 17x30x7mm /Use 6 pieces 608 bearings for a large rotating plate under horses, press them properly and use 3 pieces 608 bearings in the outer gears where the golden horses are. Bearing 6903- /17x30x7mm/ use it in the hole in the base - the big gray part, it helps turn the big golden circle.I recommend smoothing out the waves on the base a little so that the horses move better.The parts fit together just right, maybe you need to push the bearings into the moving plate a little.The axles under the horses may need to be sanded a little so that they move freely in the holes in the toothed axles. If there is a problem, write to me, I will be happy to helpAdded part: a turning stick, you can insert it instead of a horseIn case of problems when slicing 3mf files - if holes are missing in the parts, I recommend using the PrusaslicerFilaments used: Prusament PLA Viva La Bronze                             Prusament PLA Galaxy Silver                                You can find another carousel model  here:  https://www.printables.com/cs/model/275718-wheel-carousel-with-heartshttps://www.printables.com/cs/model/295206-carousel-with-butterflies-and-caterpillars                                                   I wish you a lot of fun!