Meanwell LRS-100-5 + ESP8266 Enclosure for WLED Neopixel Strips

prusaprinters

<p>This is an enclosure designed to fit closely to a Meanwell LRS-100-5 power supply, and to house a NodeMCU Base PCB.</p> <p>My objective was to have a neat, all-in-one enclosure for all I need to run the excellent WLED "Neopixel" addressable LED controller:<br/> <a href="https://github.com/Aircoookie/WLED">https://github.com/Aircoookie/WLED</a></p> <p>The enclosure uses four M3 heat set threaded inserts to retain the lid, and a fifth is used to couple to the PSU. The type of inserts I used are shown in one of the images.</p> <p>The enclosure has an aperture for a IR receiever, which WLED can make use of for IR remotes.</p> <p>I have included "bunny ear" corner brims - add these on the slicer build plate aligned to the box/lid for low effort low material brims - they work great. The 3MF files should have these brims already pre-aligned.</p> <p>I have remixed using the wire strain relief from this thing on Thingiverse: <a href="https://www.thingiverse.com/thing:4498756">https://www.thingiverse.com/thing:4498756</a> - thanks to the OP.</p> <p>The model (STEP) of the LRS-100-5 is available from the meanwell site: <a href="https://www.meanwell.com/productPdf.aspx?i=411">https://www.meanwell.com/productPdf.aspx?i=411</a></p> <p>3D models are provided as:</p> <ul> <li>STLs for all parts and brims</li> <li>3MF for parts + brims aligned on build plate</li> </ul> <h3>Print instructions</h3><p>I printed with PLA @ 60mm/sec<br/> 0.28mm layer height<br/> No supports<br/> Used the bunny ear brims</p>