Mean Well RD-85A switch cover with output connectors

prusaprinters

<p>The Mean Well RD-85A is a fanless AC-DC dual output power supply - 5Vdc 10A and 12Vdc 5A.</p><p>I'm using the Mean Well RD-85A power supply to power 130 LED lights (SK6812 RGBW - 5v at a max of 5A) and a Raspberry Pi 4 (5v at a max 3A) as part of the enclosure for my Prusa i3 MK3S+. &nbsp;&nbsp;</p><p>(The 12-volt side of the RD-85A is for future features, such as a 12v exhaust fan)</p><p>I designed this to have a power switch for the power supply as well has quick disconnects for any devices that were connected to it (as opposed to having everything wired directly to the terminals).</p><p>&nbsp;</p><p><strong>You will need these screws to finish the project:</strong></p><ul><li>Attach the left side lid: M2.5 x 8mm (qty 4)</li><li>Attach AMASS connectors: M2.5-0.45 x 8mm (qty 8)</li><li>Attach the AC on/off switch: M3 x 6mm (qty 2)</li><li>Attach the entire cover to the RD-85A: M3 x 6mm (qty 2)</li></ul><p>&nbsp;</p><p><strong>Printing:</strong></p><p>*See images for slicer orientation</p><ul><li>Print setting: 0.20mm Quality</li><li>Filament: PETG</li><li>Supports: None</li><li>Infill: 15%</li><li>Other: I used 2 perimeters to save a little time. &nbsp;Also had “Detect thin walls” checked, but that may not be needed.</li></ul><p>&nbsp;</p><p><strong>Check this out too:</strong></p><p>I've also designed a wall mount for the MeanWell RD-85A power supply that works with this terminal cover: &nbsp;https://www.prusaprinters.org/prints/138881-mean-well-rd-85a-mount-bracket</p><p>&nbsp;</p><p>This project was inspired by the project “Meanwell LRS-350-24 Case Ender3 (Pro)” by “BBoySilvester" found on Thingiverse: https://www.thingiverse.com/thing:5139347</p>