MDD Direct Drive Clone Hero Me Ender 3 Gantry Plate

prusaprinters

<p><strong>Backstory</strong></p><p>I purchased one of the cheaper knockoff MDD v1.2 (Modular Direct Drive) plates and was unhappy when I found that the holes for the gantry plate were not aligning. Therefore I remixed the original gantry plate adapter (<i>PM_CR-Ender_OEM-MS_Gantry_Adapter_5A</i>) from the HMG6 to fit the two threaded holes in the MDD plate.&nbsp;</p><p>The relative positions of nozzle and ABL mount as well as their heights are unchanged. I slightly modified the spacer for the hotend to make room for better air flow from the hotend cooler.&nbsp;</p><p>&nbsp;</p><p><strong>Models</strong></p><p>I uploaded two versions, one with chamfers and one without. I always like to have rounded corners, since the printers are unable to print right angles anyway. However, if you don't like it use the <i>_NoChamfer</i> version.</p><p>&nbsp;</p><p><strong>Printing:</strong></p><ul><li><strong>No supports required</strong></li><li>Infill: 35-50%&nbsp;</li><li>Walls: 4</li></ul><p>&nbsp;</p><p><strong>If you have questions or like this print, consider leaving a like, comment or a make. Thank you!</strong></p>